Test1
A range of centralised and distributed display options providing indication, alarm and control of all tanks. Repeater displays provide function critical information at additional locations.
See VPM systems here
Ship's trim and list measurement
A pair of solid state, inclinometers installed 90° with respect to each other, measure bow, stern and port, starboard angles
More info here
Overfill protection for waste water / oil storage
KD 30 level switch used to detect a high level condition in bilge and service tanks
See KD 30
Bunker fuel oil measurement in engine room
APT500 or APT1000 level transmitter with flange mount installed at the base of the tank via an isolating valve as isolation from potential high temperatures
See APT500See APT1000
Scanrad - cargo tank level & volume measurement
An advanced FMCW radar sensor providing high performance with low maintenance needs. Compact design with no intrusive sensor dome ensures simplicity of installation.
Scanrad product information
Level detection in bilges and void spaces
BLS 9200 bilge switches detect the rising level of water or oily waste as part of a pump control or flood detection safety system
See BLS 9200See BilgeSafe
Cargo tank overpressure and vacuum measurement
APT500 or APT1000 with a direct pressure calibration measures the cargo tank inert gas blanket directly or in the vent manifold
See APT500See APT1000
See VentSafe
Wing ballast tank measurement
Wing ballast tank measurement APT500 or APT1000 level transmitters are installed at the bottom of a stilling tube with cable exit via a deck penetration flange
See APT500See APT1000
Double-bottom ballast tank measurement
APT500 or APT1000 level transmitters are installed using a clamp mount with cable exit via a liquid-tight bulkhead penetration
See APT500See APT1000
Ship's draught measurement
APT500 or APT1000 level transmitter installed inside a vented draught tube is used to measure the ship’s depth in the water
See APT500See APT1000
